Changelog

Author: SeekGene

Time: 10 min

Words: 1.9k words

Updated: 2026-10-13

Reads: 0 times

All notable changes to this project will be documented in this file.

[2.2.0] 2026-06-18

Changed

• Default chemistry changed from DD-MET3 to DD-MET5 across all workflows (Nextflow and Shell), aligning with SeekOne DD kit defaults.
• Added fail-fast validation for expression/methylation FASTQ R1/R2 pair counts to avoid silently reusing the last mate file when sample inputs are mismatched.
• sc_methy_workflow.sh: Forward and reverse barcode fastp QC now runs in parallel (lightweight task, safe for large datasets).
• sc_methy_workflow.sh: Multi-batch FASTQ merge now concatenates gzip members directly instead of decompressing and recompressing.
• step3_split_bams.py: Reworked BAM splitting from multi-process repeated full-file traversal to single-pass barcode-group traversal, reducing redundant I/O.
• barcode_cs_multi.py: Added trie-backed Hamming search for distance > 1 barcode correction and fixed QcStat.update() nested counter merging.
• step3_bam_to_allc.py: Replaced shell-string subprocess calls with argument-list calls and guaranteed cleanup of intermediate sorted BAM files.
• step4_wgs_summary.py: Replaced repeated full-report regex scans with line-by-line Bismark report parsing.
• Extracted common parameter initialization code (~70 lines) from rna_met, met_only, and forcecell into shared module nf/modules/params_init.nf, reducing code duplication.
• Added withName resource configurations for all force_cell processes and MERGE_BISMARK_BAM.
• Reduced default METHYLATION_BARCODE_EXTRACTION memory from 120 GB to 48 GB with retry-based scaling.
• Aligned Docker profile container image with README documentation.
• nf/nextflow.config: Dynamic-memory processes now double requested memory on retry only when the previous attempt died from an OOM-class exit code (134, 137–140); other failures (e.g. 143 SIGTERM from node preemption) retry at the same memory level. Consolidated into a shared oomAwareMemory closure used by all 16 dynamic-memory processes. Requires Nextflow >= 24.10.0 (task.previousTrace).
• nf/nextflow.config: Bumped manifest nextflowVersion from >=21.04.0 to >=24.10.0 to match the actual runtime requirement of the oomAwareMemory closure (task.previousTrace). Without this, Nextflow 21.04–24.09 pass the manifest check but crash on the first dynamic-memory retry.

Fixed

• barcode_cs_multi.py: Multi-read chain direction was re-determined from the post-adapter-trim R1 sequence in the multi rescue second pass, which could flip forward/reverse relative to the pre-trim direction used in the first pass or return unknown when the trimmed R1 was too short to cover the direction-diagnostic positions. In v2.1.2 and earlier, unknown multi reads were counted as valid but were not counted as forward/reverse, were not included in forward_chimeric/reverse_chimeric, and were not written to Bismark input FASTQ files. This silently dropped rescued multi reads and made Dropped_Chimeric artificially low because the unknown reads inflated the denominator without contributing to the chimeric numerator. Fixed by carrying the pre-trim chain_direction through the multi temp FASTQ read name (barcode_old_candidate_list_umi_chain_direction_original_read_name) and reusing it in the second pass.
• barcode_cs_multi.py: get_new_bc() one-mismatch correction for barcodes containing N overwrote prior candidates with mm_dict = {...}; switched to .update(...) so the N-position substitutions are merged with the rest of the one-base mismatch set rather than replacing them.
• barcode_cs_multi.py: ct_mean / cc_mean divided by zero when line_A / line_B was zero (no qualifying reads). Added >0 guards that emit 0.0 plus a *_missing_evidence flag in the summary JSON so the downstream report can mark the metric as missing instead of crashing.
• barcode_cs_multi.py: Reads with average quality below 30 in the CT/CC window were silently dropped from conversion-rate accounting; added a low_quality_skipped counter so the loss is now visible in the summary.
• step3_split_bams.py / step3.nf: methy_only workflow passed methylation barcodes to --gexcb but the splitter still applied the gex_cb → m_cb whitelist mapping, producing an empty cell list. Added --gexcb-is-methylation and switched methy_only to use it.
• step3_estimated_cells.py: filtered_barcode was written with a bare relative path and landed in the process work directory instead of outdir; pinned to os.path.join(outdir, 'filtered_barcode').
• step3_merge_sc_metrics.py: Barcode extraction matched _all.gz.count.csv but actual files are _allc.gz.count.csv; the mismatch fell through to a fallback that left an _allc.gz suffix on the barcode, breaking downstream joins. Added the correct suffix as the primary match.
• step3_mcds_manager.py: Added a defensive pre-merge guard _validate_unique_obs_across_shards(). xarray.Dataset.to_zarr(append_dim=...) does not reject duplicate cell coordinates, so a shard merge with duplicate cells (within or across shards) would silently produce a merged MCDS whose cell index contains repeated entries instead of failing. The new check fails fast with an explicit error if duplicates are detected. No duplicate cells were observed in tiny-demo data; this hardens the merge against the theoretical case.
• step4_report_rna_met.py: Added a defensive deduplicate_cells_by_m_cb() that aggregates shard-level methylation cell metrics to one row per m_cb (additive counters via sum, recomputing weighted_mc_rate / cell_saturation / *_mc_rate from summed counters, and validating reads_counts exists and is numeric) before the RNA+methylation join. Without it, duplicate m_cb rows would propagate into the join as duplicated/cartesian rows. No duplicate m_cb rows were observed in tiny-demo data; this guards the join against the theoretical case.
• step4_wgs_summary.py: parse_cell_info set the dataframe index to barcode without deduping, producing a non-unique index when reads-count CSVs had duplicates; group by barcode and sum reads_counts before indexing.
• step4_wgs_summary.py: Fraction Reads in Cells divided by summary["mapping"]["uniquereads"] without a key/zero guard; falls back to 0.0 when missing or zero.
• step4_wgs_summary.py: Per-cell summary CSV header renamed Reads_of_Max/Median_Cell → Read_Pairs_of_Max/Median_Cell to match the actual unit (paired-end reads).
• nf/modules/step1.nf: CREATE_FORWARD_PAIRS / CREATE_REVERSE_PAIRS now emit FASTQ pairs as Nextflow path outputs (linked into a per-process output directory) rather than relying on publishDir side effects; the previous design risked downstream tasks racing against the publish step.
• nf/modules/step1.nf: METHYLATION_BARCODE_EXTRACTION now writes empty gzipped placeholders when one strand produces no reads, so downstream outer-join logic can explicitly handle the missing direction instead of hitting a glob with zero matches.
• nf/modules/step3.nf: MERGE_BISMARK_BAM guarded against empty forward/reverse arrays (for f in "${arr[@]}" under set -u errored when the array was empty), and emits a warning if both sides are empty.
• nf/modules/step3.nf: ALLCOOLS_MERGE cleared merge_list_real.txt (: > merge_list_real.txt) before appending, so resumed runs do not see stale entries from a previous attempt.
• nf/modules/force_cell_custom.nf: Pre-analysis pre_outdir and addtag_dir are now declared as path inputs (instead of val), so Nextflow actually stages the directories into each consumer's work dir. The previous val form caused downstream processes to read from non-existent paths.
• nf/modules/force_cell_custom.nf: FORCE_CELL_APPLY_ALLOCOOLS_CHANGES switched from find -maxdepth 1 to a recursive find (per-cell ALLC files live in nested directories) and added a post-delete verification that fails the process if a dropped barcode's files remain.
• nf/modules/force_cell_custom.nf: Replaced hard-coded oss-cn-beijing-internal.aliyuncs.com with ${params.oss_endpoint} for ossutil calls.
• nf/modules/force_cell_custom.nf: Replaced oss_cp ... || true silent fallbacks for allcools.tar.gz / allcools_generate_datasets.tar.gz with an explicit fallback to download the underlying directory (and a warning), so a tar miss no longer silently leaves the consumer with no data.
• nf/modules/step4.nf: METHYLATION_SUMMARY consolidated the separate forward/reverse Bismark report inputs into a single bismark_reports collection and symlinks *_bismark_bt2_PE_report.txt into step2/bismark/, so the summary step no longer breaks when one strand is missing.
• nf/modules/utils.nf: ESTIMATED_CELLS input tuple dropped the obsolete pair_id element so forward and reverse mapped-read count CSVs are both received for cell estimation.
• docs/How_to_build_reference_genome.md: Fixed example config path nextflow.new.config → nextflow.config.
• Fixed methy_only barcode-extracted FASTQ path reconstruction to include the sample-level publish directory.
• Fixed methy_only cell estimation input shape so forward and reverse mapped-read count CSVs are both staged for ESTIMATED_CELLS.
• Fixed rna_met downstream grouping to use the actual merged forward/reverse pair count from MERGE_BISMARK_BAM instead of Math.max(forward_count, reverse_count).
• Fixed barcode-extracted FASTQ dataflow so rna_met and methy_only consume Nextflow path outputs instead of reconstructing files from asynchronous publishDir locations.
• Added empty gzipped forward/reverse placeholders when barcode extraction has no reads for one strand, allowing downstream outer-join logic to handle missing directions explicitly.
• Fixed OSS force_cell staging to write directly into the stable pre-analysis staging directory referenced by downstream processes, avoiding publishDir symlink races.

Added

• nf/modules/params_init.nf: Shared parameter initialization module with initCommonParams() and sanitizeSpaces() functions.
• nf/bin/stage_file.sh: Shared file staging helper for local and OSS inputs.
• nf/bin/lint_config_schema.py: Lightweight config/schema/version consistency lint script.
• local_test profile for lightweight local syntax/config checks.
• params.oss_endpoint (default oss-cn-beijing-internal.aliyuncs.com) registered in nextflow_schema.json so OSS endpoints are configurable.

[2.1.2] 2026-04-30

Fixed

• Fixed version number inconsistency in subworkflow help messages (rna_met and met_only showed 2.1.1/v1.0.0 instead of 2.1.2).
• Fixed missing space before "for" in README.md line 206.
• Fixed several configuration issues.

Removed

• Removed Fastp parameters --max-len1 60 --max-len2 0.

Added

• Added .gitignore entry for CLAUDE.md.
• Added trailing newline to .gitignore.

[2.1.1] 2026-03-24

Fixed

• Resolved the input error "* Chromosome chrM doesn't present in the .genome file. *" in sc_methy_workflow.sh.

[2.1.0] 2026-03-13

Fixed

• Fixed an issue where batch FASTQ results were lost when forward and reverse fastq counts were unequal.

[2.0.0] 2026-02-26

Added

• Added a guide for building the reference genome database directory (--database_dir).
• Added a force_cell workflow for updating results based on previous outputs.
• Added validation for sample_id and outdir; whitespace is now disallowed and normalized to underscores.

Changed

• Optimized MCDS generation by splitting into smaller tasks and merging results.
• Updated repository layout documentation to match the current DSL2 structure.

[1.0.7] 2026-01-23

Fixed

• Fixed a bug in the step3 module where the allc_file_path.txt file was not being generated correctly.
• Updated sc_methy_workflow.sh to support multiple datasets per sample.

[1.0.6] 2025-12-30

Changed

• Updated nextflow.config.
• Updated methy_only.nf.
• Updated main.nf.

[1.0.5] 2025-12-22

Changed

• Updated barcode whitelist.

[1.0.4] 2025-12-18

Changed

• Updated the C-T conversion rate algorithm.

[1.0.3] 2025-12-09

Fixed

• Fixed a metric reporting issue in rna_methyl_report.html and rna_methy_summary.csv where values were incorrectly displayed as read numbers instead of read pairs (persisted in v1.0.1 and v1.0.2).

[1.0.2] 2025-12-02

Added

• Added a project parameter to tag each process with project-specific information.

Fixed

• Fixed a bug where cells containing only reverse reads or only forward reads were incorrectly filtered out.

[1.0.1] 2025-11-21

Changed

• Updated workflow version from 1.0.0 to 1.0.1 in nextflow.config.
• Updated the MET section in HTML reports to label and report values as "read pairs" instead of "reads".

Added

• Added a summary CSV file (rna_methy_summary.csv) containing the same metrics as the HTML report, saved in the same output directory.

[1.0.0] 2025-10-31

Added

• Initial release of the SeekSoulMethyl pipeline for single-cell transcriptome and methylation dual-omics analysis.