SeekSoul Tools v1.3.0

Author: SeekGene

Time: 28 min

Words: 5.6k words

Updated: 2025-07-25

Reads: 0 times

SeekSoul Tools v1.3.0 is a software developed by SEEKGENE for processing single-cell transcriptome data. Currently, the software contains five modules:

rna module: This module is used for identifying cell barcodes, genome alignment and gene quantification to obtain a feature-barcode matrix for downstream analysis, followed by cell clustering and differential analysis. This module not only supports data from SeekOne® series kits but also supports various custom structure designs through barcode descriptions.
fast module: This module is specifically designed for data produced by the SeekOne® DD Single Cell Full-length RNA Sequence Transcriptome-seq Kit, used for barcode extraction, paired-end read alignment, quantification, and unique metrics analysis for full-length transcriptome data.
vdj module: This module is specifically designed for data produced by the SeekOne® DD Single Cell Immune Profiling Kit, used for assembling, filtering, and annotating immune receptors.
multivdj module: This module is used for joint analysis of 5' RNA and VDJ data.
utils module: This module contains additional utility tools.

Software Download

SeekSoul Tools v1.3.0

Download-SeekSoulTools - md5: 21b19d5f10022f0d8caf1a1a9c3f66c6

wget download method:

shell

wget -c -O seeksoultools.1.3.0.tar.gz "https://seekgene-public.oss-cn-beijing.aliyuncs.com/software/seeksoultools/seeksoultools.1.3.0.tar.gz"

curl download method:

shell

curl -C - -o seeksoultools.1.3.0.tar.gz "https://seekgene-public.oss-cn-beijing.aliyuncs.com/software/seeksoultools/seeksoultools.1.3.0.tar.gz"

Software Installation

IMPORTANT

Before installation, ensure your system meets the requirements and has sufficient disk space. The first-time initialization may take longer than usual.

Installation:

shell

# decompress
tar zxf seeksoultools.1.3.0.tar.gz
cd seeksoultools.1.3.0

# set environment variables
export PATH=`pwd`:$PATH
echo "export PATH=$(pwd):\$PATH" >> ~/.bashrc

# initialization and installation verification
`pwd`/seeksoultools --version

Usage Guide

rna module

Data Preparation

NOTE

Before starting the analysis, ensure you have prepared the following required files:

Sequencing data (FASTQ format)
Reference genome for the corresponding species
Gene annotation file (GTF format)

Download Sample Datasets

Sample Datasets - md5: 3d15fcfdefc0722735d726f40ec4e324 (Species: Human)

wget download method:

shell

wget -c -O demo_dd.tar "https://seekgene-public.oss-cn-beijing.aliyuncs.com/software/data/demodata/demo_dd.tar"
# decompress
tar xf demo_dd.tar

curl download method:

shell

curl -C - -o demo_dd.tar "https://seekgene-public.oss-cn-beijing.aliyuncs.com/software/data/demodata/demo_dd.tar"
# decompress
tar xf demo_dd.tar

Download and Build Reference Genome

Download-human-reference-GRCh38 - md5: 5473213ae62ebf35326a85c8fba6cc42

Download-mouse-reference-mm10 - md5: 5c7c63701ffd7bb5e6b2b9c2b650e3c2

wget download method:

shell

wget -c -O GRCh38.tar.gz "https://seekgene-public.oss-cn-beijing.aliyuncs.com/software/data/reference/GRCh38.tar.gz"
# decompress
tar -zxvf GRCh38.tar.gz
wget -c -O mm10.tar.gz "https://seekgene-public.oss-cn-beijing.aliyuncs.com/software/data/reference/mm10.tar.gz"

tar -zxvf mm10.tar.gz

curl download method:

shell

curl -C - -o GRCh38.tar.gz "https://seekgene-public.oss-cn-beijing.aliyuncs.com/software/data/reference/GRCh38.tar.gz"
# decompress
tar -zxvf GRCh38.tar.gz

curl -C - -o mm10.tar.gz "https://seekgene-public.oss-cn-beijing.aliyuncs.com/software/data/reference/mm10.tar.gz"

tar -zxvf mm10.tar.gz

For reference genome construction, please refer to How to build reference genome?

Running

Run Examples

TIP

SeekSoul Tools v1.3.0 provides multiple running modes for different analysis needs. The following examples cover the most common use cases. Choose the appropriate parameter combinations based on your specific requirements.

Example 1: Basic Usage

Set up the necessary configuration files for analysis, including sample data paths, chemistry version, genome index, GTF, etc. Run SeekSoulTools using the following command:

shell

seeksoultools rna run \
--fq1 /path/to/demo_dd/demo_dd_S39_L001_R1_001.fastq.gz \
--fq2 /path/to/demo_dd/demo_dd_S39_L001_R2_001.fastq.gz \
--samplename demo_dd \
--genomeDir /path/to/GRCh38/star \
--gtf /path/to/GRCh38/genes/genes.gtf \
--chemistry DDV2 \
--core 4 \
--include-introns

Example 2: Specify a Different Version of STAR for Analysis

To use a specific version of STAR for analysis while ensuring compatibility with the --genomeDir generated by that version, run SeekSoulTools with the path to the desired STAR version:

shell

seeksoultools rna run \
--fq1 /path/to/demo_dd/demo_dd_S39_L001_R1_001.fastq.gz \
--fq2 /path/to/demo_dd/demo_dd_S39_L001_R2_001.fastq.gz \
--samplename demo_dd \
--genomeDir /path/to/GRCh38/star \
--gtf /path/to/GRCh38/genes/genes.gtf \
--chemistry DDV2 \
--core 4 \
--include-introns \
--star_path /path/to/cellranger-5.0.0/lib/bin/STAR

Example 3: Multiple FASTQ Files for One Sample

If a sample has multiple FASTQ datasets, provide all associated FASTQ files:

shell

seeksoultools rna run \
--fq1 /path/to/demo_dd_S39_L001_R1_001.fastq.gz \
--fq1 /path/to/demo_dd_S39_L002_R1_001.fastq.gz \
--fq2 /path/to/demo_dd_S39_L001_R2_001.fastq.gz \
--fq2 /path/to/demo_dd_S39_L002_R2_001.fastq.gz \
--samplename demo \
--genomeDir /path/to/GRCh38/star \
--gtf /path/to/GRCh38/genes/genes.gtf \
--chemistry DDV2 \
--core 4 \
--include-introns

Example 4: Custom R1 Structure

To customize the structure of Read 1 (R1) FASTQ files:

shell

seeksoultools rna run \
--fq1 /path/to/demo_dd_S39_L001_R1_001.fastq.gz \
--fq2 /path/to/demo_dd_S39_L001_R2_001.fastq.gz \
--samplename demo \
--genomeDir /path/to/GRCh38/star \
--gtf /path/to/GRCh38/genes/genes.gtf \
--barcode /path/to/utils/CLS1.txt \
--barcode /path/to/utils/CLS2.txt \
--barcode /path/to/utils/CLS3.txt \
--linker /path/to/utils/Linker1.txt \
--linker /path/to/utils/Linker2.txt \
--structure B9L12B9L13B9U8 \
--core 4 \
--include-introns

B9L12B9L13B9U8 represents the Read1 structure: 9 bases barcode + 12 bases linker + 9 bases barcode + 13 bases linker + 9 bases barcode + 8 bases UMI. The total cell barcode has 3 segments, totaling 27 bases (9*3), and the UMI is 8 bases.
Use --barcode to specify the three barcode segments and --linker to specify the two linker segments sequentially.

Parameter Descriptions

IMPORTANT

The following parameters significantly impact analysis results. Please choose carefully based on your experimental design and data characteristics:

--chemistry: Must match exactly with the kit type used
--include-introns: Affects gene expression quantification strategy
--expectNum: Affects cell number estimation

Parameters	Descriptions
--fq1	Paths to R1 fastq files.
--fq2	Paths to R2 fastq files.
--samplename	Sample name. A directory will be created with this name in the outdir directory. Only digits, letters, and underscores are supported.
--outdir	Output directory. Default: ./
--genomeDir	Path to the reference genome generated by STAR. Version must be consistent with the STAR used by SeekSoulTools.
--gtf	Path to the GTF file for the corresponding species.
--core	Number of threads used for analysis.
--chemistry	Reagent type, each corresponding to a combination of --shift, --pattern, --structure, --barcode, and --sc5p. Available options: DDV2, DD5V1, MM, MM-D. DDV2: SeekOne® DD Single Cell 3' Transcriptome-seq Kit DD5V1: SeekOne® DD Single Cell 5' Transcriptome-seq Kit MM: SeekOne® MM Single Cell Transcriptome Kit MM-D: SeekOne® MM Large-well Single Cell Transcriptome-seq Kit
--skip_misB	Disallow barcode base mismatches. Default allows one base mismatch.
--skip_misL	Disallow linker base mismatches. Default allows one base mismatch.
--skip_multi	Discard reads that can be corrected to multiple white-listed barcodes. Default corrects to the barcode with highest frequency.
--expectNum	Estimated number of captured cells.
--forceCell	When normal analysis yields unsatisfactory cell numbers, use this parameter followed by an expected value N. SeekSoulTools will take the top N cells by UMI count.
--include-introns	When disabled, only exon reads are used for quantification; when enabled, intron reads are also used.
--star_path	Specify path to alternative STAR version for alignment. Version must be compatible with --genomeDir. Default uses STAR from environment.

Output descriptions

Here's the output directory structure: each line represents a file or folder, indicated by "├──", and the numbers indicate three important output files.

shell

./
├── demo_report.html                        1 
├── demo_summary.csv                        2
├── demo_summary.json                    
├── step1                                
│   └──demo_2.fq.gz                      
├── step2                                
│   ├── featureCounts                    
│   │   └── demo_SortedByName.bam        
│   └── STAR                             
│       ├── demo_Log.final.out           
│       └── demo_SortedByCoordinate.bam  
├── step3
│   ├── filtered_feature_bc_matrix          3
│   └── raw_feature_bc_matrix            
└──step4                                 
    ├── FeatureScatter.png               
    ├── FindAllMarkers.xls               
    ├── mito_quantile.xls                
    ├── nCount_quantile.xls              
    ├── nFeature_quantile.xls            
    ├── resolution.xls                   
    ├── top10_heatmap.png                
    ├── tsne.png                         
    ├── tsne_umi.png                     
    ├── tsne_umi.xls                     
    ├── umap.png                         
    └── VlnPlot.png

Final report in html
Quality control information in csv
Filtered feature-barcode matrix

Algorithms Overview

step1: barcode/UMI extraction

SeekSoulTools is able to extract the barcode and UMI sequences based on different Read1 structures. The pipeline processes the barcodes and filters Read1 and its corresponding Read2, and an updated fastq file is generated at the end of step 1.

Structure design and description

Barcode and UMI descriptions: Describing the basic structure of Read1 using letters and numbers, where the letters represent the meaning of the nucleotides and the numbers represent the length of the nucleotides.
B: barcode bases L: linker bases U: UMI bases X: other arbitrary bases used as placeholders
Taking the following two Read1 structures as examples: B8L8B8L10B8U8：
B17U12：
Anchor-based misalignment design: In MM design, to increase the base balance of the linker portion during sequencing,1-4 bp shifted bases, called anchors, were added. The anchor determines the starting position of the barcode.

Workflow

Anchor determination:

For data with misaligned Read1 (produced by MM reagents), SeekSoulTools attempts to find the anchor sequence within the first 7 bases of the Read1 sequence to determine the start position of subsequent barcodes. If the anchor sequence is not found, the corresponding Read1 and R2 are considered invalid reads.

Barcode and linker correction:

After determining the starting position of the barcode, the corresponding sequence is extracted based on the structural design. When the extracted barcode sequence is found in the whitelist, it is considered a valid barcode and the read count with valid barcodes is recorded. When the barcode is not found in the whitelist, it is considered an invalid barcode.

During sequencing process, there is a certain probability that sequencing error occurs. With the presense of a whitelist, SeekSoulTools are able to do barcode correction. When correction is enabled, if sequences that are one base differ (one humming distance apart) from the invalid barcode appear in the whitelist, we will consider the following circumstances:

If there is one and only sequence exists in the whitelist, we will correct the invalid barcode to the barcode in the whitelist.
If multiple sequences exist in the whitelist, we will correct the invalid barcode to the sequence with the highest read support.

The logic of linker correction is the same as that of barcode correction.

Adaptors and polyA sequence trimming

In transcriptome, polyA tail and Adapter sequences introduced during library preparation, may appear at the end of Read2.We remove these contaminating sequences and make sure the trimmed Read2 length is greater than the minimum length for accurate alignment afterward. If the trimmed Read2 length is less than the minimum length, we consider the read to be invalid.

After the processing procedure described above, the data composition is shown in the following figure:

step1

total: Total reads
valid: Number of reads without correction and number of successfully corrected reads
B_corrected: Number of successfully corrected reads
B_no_correction: Number of reads with incorrect barcodes
L_no_correction: Number of reads with incorrect linkers
no_anchor：Number of reads without anchors
trimmed: Number of reads that have been trimmed
too_short: Number of reads that are shorter than 60bps after trimming

The relationships between the metrics are as follows:

total = valid + no_anchor + B_no_correction + L_no_correction

Number of reads in the updated FASTQ file: total_output = valid - too_short

step2: Alignment

Sequence Alignment

SeekSoulTools uses an aligner software called STAR to perform splicing-aware alignment of reads to the genome.
After the alignment procedure has mapped the reads to the genome, SeekSoulTools uses another software called QualiMap along with a gene annotation transcript file GTF to bucket the reads into exonic, intronic, and intergenic regions.
Using featureCounts, the reads aligned to the genome were annotated to genes, with different rules such as strand specificity and features used for annotation. When using exon for annotation, a read is annotated to the corresponding gene if over 50% of its bases are aligned to the exon. When using transcripts for annotation, a read is annotated to the corresponding gene if over 50% of its bases are aligned to the transcript.

After the processing procedure described above, the metrics is shown below:

Reads Mapped to Genome: Fraction of reads that aligned to the genome (including both uniquely mapped reads and multi-mapped reads)
Reads Mapped Confidently to Genome: Fraction of reads that uniquely mapped to the genome
Reads Mapped to Intergenic Regions：Fraction of reads that mapped to intergenic regions
Reads Mapped to Intronic Regions：Fraction of reads that mapped to intronic regions
Reads Mapped to Exonic Regions：Fraction of reads that mapped to exonic regions

step3: Counting

UMI counting

SeekSoulTools extracts group of reads that shared the same barcode from output BAM file and counts the number of UMIs annotated to genes and the number of reads corresponding to each UMI.

Filter out reads whose UMIs consist of repetitive bases. For example, TTTTTTTT.
If a read has multiple annotations and only one gene annotation is from exon, it is considered a valid read, and all others are filtered.

UMI correction

UMIs may also have sequencing errors during sequencing process. By default, SeekSoulTools uses the adjacency from UMI-tools to correct UMIs.

Schematic from UMI-tools Image source: https://umi-tools.readthedocs.io/en/latest/the_methods.html

Cell calling

In a cell population, we assume that the mRNA content of cells does not differ significantly. If the mRNA content of a barcode is very low, we consider that barcode might be 'empty', and the mRNA comes from the background. SeekSoulTools uses the following steps to determine whether a barcode has a cell:

Sort all barcodes in descending order based on their corresponding UMI counts.
The threshold is calculated by dividing the number of UMIs for the barcode at the 1% position of the estimated cells by 10.
Barcodes with UMIs greater than the threshold are considered to be cells.
If the UMI of a barcode is less than the threshold but greater than 300, DropletUtils is used for further analysis. The DropletUtils method first assumes that barcodes with UMI counts below 100 are empty droplets. It then uses the total UMI count for each gene in each droplet as the expected UMI count for that gene in the background RNA expression profile. Next, it performs a statistical test on the UMI counts of each barcode, identifying those with significant differences as cells.
Those do not meet the above criteria are considered as background.

After the processing procedure described above, the metrics is shown below:

Estimated Number of Cells: Total number of cells by cell calling
Fraction Reads in Cells: Fraction of reads after cell calling among all reads used for counting
Mean Reads per Cell: Average number of reads per cell, Total number of reads/Number of cells after cell calling
Median Genes per Cell: Median gene count in barcodes after cell calling
Median UMI Counts per Cell: Median UMI count in barcodes after cell calling
Total Genes Detected: Number of genes detected in all cells
Sequencing Saturation: 1 - Total UMI count/Total read count

step4: Downstream analysis

SeekSoulTools perform downstream analysis when we have gene expression matrix from step3.

Seurat analysis

SeekSoulTools use Seurat to calculate the mitochondrial content, number of genes, and UMIs of each cell. After that, the gene expression matrix is normalized, and a subset of features that exhibit high cell-to-cell variation in the dataset is identified. Linear dimensional reduction using PCA is then performed, and the result is passed to t-SNE and UMAP for visualization. A graph-based clustering procedure is then followed, and cells are partitioned into different clusters. Finally, SeekSoulTools finds markers that define clusters via differential expression.

fast module

Data preparation

Download sample datasets

sample datasets - md5: 878de2833feea2deb7d79224409d0d09（Species: Homo sapiens.）

wget

shell

wget -c -O cellline.tar.gz "https://seekgene-public.oss-cn-beijing.aliyuncs.com/software/data/demodata/cellline.tar.gz"
# decompress
tar zxf cellline.tar.gz

curl

shell

curl -C - -o cellline.tar.gz "https://seekgene-public.oss-cn-beijing.aliyuncs.com/software/data/demodata/cellline.tar.gz"
# decompress
tar zxf cellline.tar.gz

Download and assembly of reference genome

Download-human-reference-GRCh38 - md5: 5473213ae62ebf35326a85c8fba6cc42

Download-hg38-rRNA - md5: 9949f6cea38633daf1d5bf1a2b976488

Download-mouse-reference-mm10 - md5: 5c7c63701ffd7bb5e6b2b9c2b650e3c2

Download-mouse-rRNA - md5: 7a1c2d573086fa9240c8978bb8a859f7

wget

shell

wget -c -O GRCh38.tar.gz "https://seekgene-public.oss-cn-beijing.aliyuncs.com/software/data/reference/GRCh38.tar.gz"
# decompress
tar -zxvf GRCh38.tar.gz

wget -c -O hg38_rRNA.tar.gz "https://seekgene-public.oss-cn-beijing.aliyuncs.com/software/data/reference/hg38_rRNA.tar.gz"
tar -zxvf hg38_rRNA.tar.gz

wget -c -O mm10.tar.gz "https://seekgene-public.oss-cn-beijing.aliyuncs.com/software/data/reference/mm10.tar.gz"
tar -zxvf mm10.tar.gz

wget -c -O mouse_rRNA.tar.gz "http://seekgene-public.oss-cn-beijing.aliyuncs.com/software/data/reference/mm10_rRNA.tar.gz"
tar -zxvf mouse_rRNA.tar.gz

curl

shell

curl -C - -o GRCh38.tar.gz "https://seekgene-public.oss-cn-beijing.aliyuncs.com/software/data/reference/GRCh38.tar.gz"
# decompress
tar -zxvf GRCh38.tar.gz

curl -C - -o hg38_rRNA.tar.gz "https://seekgene-public.oss-cn-beijing.aliyuncs.com/software/data/reference/hg38_rRNA.tar.gz"
tar -zxvf hg38_rRNA.tar.gz

curl -C - -o mm10.tar.gz "https://seekgene-public.oss-cn-beijing.aliyuncs.com/software/data/reference/mm10.tar.gz"
tar -zxvf mm10.tar.gz

curl -C - -o mouse_rRNA.tar.gz "http://seekgene-public.oss-cn-beijing.aliyuncs.com/software/data/reference/mm10_rRNA.tar.gz"
tar -zxvf mouse_rRNA.tar.gz

The assembly of the reference genome refers toHow to build reference genome?

Run SeekSoulTools

Run tests

Example 1: single cell full length RNA sequence data

Set up the necessary configuration files for the analysis, including the paths to the sample data, the chemistry versions, the genome index, the gene annotation file, etc. Run the SeekSoulTools using the following command:

shell

seeksoultools fast run \
--fq1 /path/to/cellline/cellline_R1.fq.gz \
--fq2 /path/to/cellline/cellline_R2.fq.gz \
--samplename demo \
--genomeDir /path/to/GRCh38/star \
--gtf /path/to/GRCh38/genes/genes.gtf \
--chemistry DD-Q \
--include-introns \
--core 4

Example 2: Single-cell transcriptomic data from FFPE samples, using parameters --scoremin 0.2 --matchnmin 0.33

shell

seeksoultools fast run \
--fq1 /path/to/ffpe/ffpe_R1.fq.gz \
--fq2 /path/to/ffpe/ffpe_R2.fq.gz \
--samplename demo \
--genomeDir /path/to/GRCh38/star \
--gtf /path/to/GRCh38/genes/genes.gtf \
--scoremin 0.2 \
--matchnmin 0.33 \
--chemistry DD-Q \
--include-introns \
--core 4

Parameter descriptions

Parameters	Descriptions
--fq1	Paths to R1 fastq files.
--fq2	Paths to R2 fastq files.
--samplename	Sample name. A directory will be created named after the sample name in the outdir directory. Only digits, letters, and underscores are supported.
--outdir	Output directory. Default: ./
--genomeDir	The path of the reference genome generated by STAR. The version needs to be consistent with the STAR used by SeekSoulTools.
--gtf	Path to the GTF file for the corresponding species.
--rRNAgenomeDir	The path to the reference genome generated by STAR, which is used for evaluating rRNA portion. The version needs to be consistent with the STAR used by SeekSoulTools.
--rRNAgtf	Path to the GTF file for the corresponding species, which is used for evaluating rRNA portion.
--core	Number of threads used for the analysis
--chemistry	Reagent type, with each type corresponding to a combination of`--shift`,`--pattern`,`--structure`,`--barcode` and `--sc5p`.Available options: DD-Q.DD-Q corresponds to the SeekOne™ DD Single Cell Full-length RNA Sequence Transcriptome-seq Kit.
--skip_misB	If enabled, no base mismatch is allowed for barcode. Default is 1.
--skip_misL	If enabled, no base mismatch is allowed for linker. Default is 1.
--skip_multi	If enabled, discard reads that can be corrected to multiple white-listed barcodes. Barcodes are corrected to the barcode with the highest frequency by default.
--expectNum	Estimated number of captured cells.
--forceCell	When the number of cells obtained from analysis is abnormal, add this parameter with expected value N. SeekSoulTools will select the top N cells based on UMI from high to low.
--include-introns	When disabled, only exon reads are used for quantification. When enabled, intron reads are also used for quantification.
--star_path	Path to another version of STAR for alignment. The version must be compatible with the`--genomeDir` version. The default`--star_path`is the STAR in the environment.
--scoremin	Set`--outFilterScoreMinOverLread`parameter of STAR. By adjusting the value, you can modify the alignment criteria for mapping reads to the reference genome for FFPE sample.
--matchnmin	Set`--outFilterMatchNminOverLread`parameter of STAR. By adjusting the value, you can modify the alignment criteria for mapping reads to the reference genome for FFPE sample.

Output descriptions

Here's the output directory structure: each line represents a file or folder, indicated by "├──", and the numbers indicate three important output files.

shell

.
├── PBMC_report.html
├── PBMC_summary.csv
├── PBMC_summary.json
├── step1
│   ├── PBMC_1.fq.gz
│   ├── PBMC_2.fq.gz
│   ├── PBMC_multi_1.fq.gz
│   ├── PBMC_multi_2.fq.gz
│   └── PBMC_multi.json
├── step2
│   ├── featureCounts
│   │   ├── counts.txt
│   │   ├── counts.txt.summary
│   │   └── PBMC_SortedByName.bam
│   └── STAR
│       ├── downbam
│       │   ├── log.txt
│       │   ├── PBMC.bed
│       │   ├── PBMC.down.0.1.bam
│       │   ├── PBMC.down.0.1.bam.bai
│       │   ├── PBMC.geneBodyCoverage.curves.pdf
│       │   ├── PBMC.geneBodyCoverage.r
│       │   ├── PBMC.geneBodyCoverage.txt
│       │   └── PBMC.reduction.bed
│       ├── PBMC_Log.final.out
│       ├── PBMC_Log.out
│       ├── PBMC_Log.progress.out
│       ├── PBMC_SJ.out.tab
│       ├── PBMC_SortedByCoordinate.bam
│       ├── PBMC_SortedByCoordinate.bam.bai
│       ├── PBMC_SortedByName.bam
│       ├── PBMC__STARtmp
│       ├── report.pdf
│       ├── rnaseq_qc_results.txt
│       └── rRNA
│           ├── counts.txt
│           ├── counts.txt.summary
│           ├── PBMC_Aligned.out.bam
│           ├── PBMC_Aligned.out.bam.featureCounts.bam
│           ├── PBMC_Log.final.out
│           ├── PBMC_Log.out
│           ├── PBMC_Log.progress.out
│           ├── PBMC_SJ.out.tab
│           ├── PBMC__STARtmp
│           └── PBMC.xls
├── step3
│   ├── counts.xls
│   ├── detail.xls
│   ├── filtered_feature_bc_matrix
│   │   ├── barcodes.tsv.gz
│   │   ├── features.tsv.gz
│   │   └── matrix.mtx.gz
│   ├── raw_feature_bc_matrix
│   │   ├── barcodes.tsv.gz
│   │   ├── features.tsv.gz
│   │   └── matrix.mtx.gz
│   └── umi.xls
└── step4
    ├── biotype_FindAllMarkers.xls
    ├── FeatureScatter.png
    ├── FindAllMarkers.xls
    ├── lncgene_FindAllMarkers.xls
    ├── mito_quantile.xls
    ├── nCount_quantile.xls
    ├── nFeature_quantile.xls
    ├── PBMC.rds
    ├── resolution.xls
    ├── top10_heatmap.png
    ├── tsne.png
    ├── tsne_umi.png
    ├── tsne_umi.xls
    ├── umap.png
    └── VlnPlot.png

The file "PBMC_report.html" is a sample HTML report of the sample.
The file "PBMC_summary.csv" contains quality control information of the sample in CSV format.
The file "step3/filtered_feature_bc_matrix" is the filtered expression matrix after applying filtering steps.
The file "step4/PBMC.rds" is an RDS file containing the matrix that has been processed using Seurat.

Algorithms Overview

step1: barcode/UMI extraction

Structure design and description

Barcode and UMI descriptions: Describing the basic structure of Read1 using letters and numbers, where the letters represent the meaning of the nucleotides and the numbers represent the length of the nucleotides.
B: barcode bases L: llinker bases U: UMI bases X: other arbitrary bases used as placeholders
The Read1 structure of the FAST product is B17U12:

Workflow

Barcode and linker correction:

If there is one and only sequence exists in the whitelist, we will correct the invalid barcode to the barcode in the whitelist.
If multiple sequences exist in the whitelist, we will correct the invalid barcode to the sequence with the highest read support.

Adaptors and polyA sequence trimming

After the processing procedure described above, the metrics is shown below:

total: Total reads
valid: Number of reads without correction and number of successfully corrected reads
B_corrected: Number of successfully corrected reads
B_no_correction: Number of reads with incorrect barcodes
trimmed: Number of reads that have been trimmed
too_short: Number of reads that are shorter than 60bps after trimming

Number of reads in the updated FASTQ file: total_output = valid - too_short

step2: Alignment

Sequence Alignment

The processed reads1 and reads2, totaling 8 million reads, were aligned to the reference genome of ribosomes using the STAR alignment software. featureCounts was used to assign the aligned reads to genes and calculate the proportions of rRNA and Mt_rRNA in the data.
STAR was used to align the processed reads1 and reads2 to the reference genome.
The GTF file was utilized to identify all exon positions of the housekeeping gene ACTB, and the proportion of intervals with coverage exceeding 0.2 times the average depth of ACTB was calculated from the BAM file.
Based on the GTF file, all exon intervals of the transcripts were converted to BED format, and 10,000 random intervals of transcripts were selected for gene body plotting.
After the alignment procedure has mapped the reads to the genome, SeekSoulTools uses another software called QualiMap along with a gene annotation transcript file GTF to bucket the reads into exonic, intronic, and intergenic regions.
Using featureCounts, the reads aligned to the genome were annotated to genes, with different rules such as strand specificity and features used for annotation. When using exon for annotation, a read is annotated to the corresponding gene if over 50% of its bases are aligned to the exon. When using transcripts for annotation, a read is annotated to the corresponding gene if over 50% of its bases are aligned to the transcript.

After the processing procedure described above, the metrics is shown below:

Reads Mapped to Genome: Fraction of reads that aligned to the genome (including both uniquely mapped reads and multi-mapped reads)
Reads Mapped to Middle Genebody：The proportion of the transcript covered by the 25%-75% interval in gene body.
Reads Mapped Confidently to Genome: Fraction of reads that uniquely mapped to the genome
Fraction over 0.2 mean coverage depth of ACTB gene：The proportion of the ACTB gene length occupied by the interval with an average coverage depth exceeding 0.2 times the average coverage depth of ACTB gene.
rRNA% in Mapped：The proportion of ribosomal genes in the sequencing data.
Mt_rRNA% in Mapped：The proportion of mitochondrial ribosomal genes in the sequencing data.
Reads Mapped to Intergenic Regions：Fraction of reads that mapped to intronic regions
Reads Mapped to Intronic Regions：Fraction of reads that mapped to intronic regions
Reads Mapped to Exonic Regions：Fraction of reads that mapped to exonic regions

step3: Counting

UMI counting

SeekSoulTools extracts group of reads that shared the same barcode from output BAM file and counts the number of UMIs annotated to genes and the number of reads corresponding to each UMI.

Filter out reads whose UMIs consist of repetitive bases. For example, TTTTTTTT.
If a read has multiple annotations and only one gene annotation is from exon, it is considered a valid read, and all others are filtered.

UMI correction

UMIs may also have sequencing errors during sequencing process. By default, SeekSoulTools uses the adjacency from UMI-tools to correct UMIs.

Schematic from UMI-tools Image source: https://umi-tools.readthedocs.io/en/latest/the_methods.html

Cell calling

Sort all barcodes in descending order based on their corresponding UMI counts.
The threshold is calculated by dividing the number of UMIs for the barcode at the 1% position of the estimated cells by 10.
Barcodes with UMIs greater than the threshold are considered to be cells.
If the UMI of a barcode is less than the threshold but greater than 300, DropletUtils is used for further analysis. The DropletUtils method first assumes that barcodes with UMI counts below 100 are empty droplets. It then uses the total UMI count for each gene in each droplet as the expected UMI count for that gene in the background RNA expression profile. Next, it performs a statistical test on the UMI counts of each barcode, identifying those with significant differences as cells.
Those do not meet the above criteria are considered as background.

After the processing procedure described above, the metrics is shown below:

Estimated Number of Cells: Total number of cells by cell calling
Fraction Reads in Cells: Fraction of reads after cell calling among all reads used for counting
Mean Reads per Cell: Average number of reads per cell, Total number of reads/Number of cells after cell calling
Median Genes per Cell: Median gene count in barcodes after cell calling
Median UMI Counts per Cell: Median UMI count in barcodes after cell calling
Total Genes Detected: Number of genes detected in all cells
Sequencing Saturation: 1 - Total UMI count/Total read count

step4: Downstream analysis

SeekSoulTools perform downstream analysis when we have gene expression matrix from step3.

Seurat analysis

vdj module reference vdj module

multivdj module reference multivdj module

utils module

addtag

Modify BAM files to include barcode and UMI tags.

Run tests

Set up necessary configuration files for analysis, including the sample's BAM file and the umi.xls file in the step3 directory. Run the SeekSoulTools using the following

shell

seeksoultools utils addtag \
    --inbam step2/featureCounts/Samplename_SortedByName.bam \
    --umifile step3/umi.xls \
    --outbam Samplename_addtag.bam

Parameter descriptions

Parameters	Descriptions
--inbam	sample's BAM file in the step2/featureCount directory.
--outbam	The path of the BAM file with added tags.
--umifile	he path of the umi.xls file in the step3 directory.

FAQ

How to build reference genome?

The assembly of the reference genome refers to How to build reference genome?

Release Notes

v1.3.0

Added multivdj module for integrated analysis of 5' RNA and VDJ data
Enhanced VDJ module with improved chain pairing analysis
Added support for multiple sample integration in RNA analysis
Improved cell type annotation and visualization
Updated report format with interactive features
Added quality control metrics for immune profiling
Enhanced documentation and error messages

v1.2.2

Added vdj module for immune repertoire analysis
Enhanced multi-chain analysis capabilities
Improved clonotype identification accuracy
Added detailed V(D)J assembly metrics
Updated report format with chain pairing visualization

v1.2.1

Updated report style
Added SP1, SP2, and TSO adapter trimming
Added addtag tool for BAM files
Enhanced support for non-standard GTF files
Fast module now supports species beyond human and mouse

v1.2.0

Added output of Read1 FASTQ file after removing barcode and UMI sequences
Added fast analysis module
Implemented UMI-tools correction method
Updated multi-gene read assignment rules: valid when unique exon annotation exists

v1.0.0

Initial release

SeekSoul Tools v1.3.0 ​

Software Download ​

Software Installation ​

Installation: ​

Usage Guide ​

rna module ​

Data Preparation ​

Download Sample Datasets ​

Download and Build Reference Genome ​

Running ​

Run Examples ​

Parameter Descriptions ​

Output descriptions ​

Algorithms Overview ​

step1: barcode/UMI extraction ​

Structure design and description ​

Workflow ​

Adaptors and polyA sequence trimming ​

step2: Alignment ​

Sequence Alignment ​

step3: Counting ​

UMI counting ​

UMI correction ​

Cell calling ​

step4: Downstream analysis ​

Seurat analysis ​

fast module ​

Data preparation ​

Download sample datasets ​

Download and assembly of reference genome ​

Run SeekSoulTools ​

Run tests ​

Parameter descriptions ​

Output descriptions ​

Algorithms Overview ​

step1: barcode/UMI extraction ​

Structure design and description ​

Workflow ​

Adaptors and polyA sequence trimming ​

step2: Alignment ​

Sequence Alignment ​

step3: Counting ​

UMI counting ​

UMI correction ​

Cell calling ​

step4: Downstream analysis ​

Seurat analysis ​

vdj module reference vdj module ​

multivdj module reference multivdj module ​

utils module ​

addtag ​

Run tests ​

Parameter descriptions ​

FAQ ​

How to build reference genome? ​

Release Notes ​

v1.3.0 ​

v1.2.2 ​

v1.2.1 ​

v1.2.0 ​

v1.0.0 ​

SeekSoul Tools v1.3.0

Software Download

Software Installation

Installation:

Usage Guide

rna module

Data Preparation

Download Sample Datasets

Download and Build Reference Genome

Running

Run Examples

Parameter Descriptions

Output descriptions

Algorithms Overview

step1: barcode/UMI extraction

Structure design and description

Workflow

Adaptors and polyA sequence trimming

step2: Alignment

Sequence Alignment

step3: Counting

UMI counting

UMI correction

Cell calling

step4: Downstream analysis

Seurat analysis

fast module

Data preparation

Download sample datasets

Download and assembly of reference genome

Run SeekSoulTools

Run tests

Parameter descriptions

Output descriptions

Algorithms Overview

step1: barcode/UMI extraction

Structure design and description

Workflow

Adaptors and polyA sequence trimming

step2: Alignment

Sequence Alignment

step3: Counting

UMI counting

UMI correction

Cell calling

step4: Downstream analysis

Seurat analysis

vdj module reference vdj module

multivdj module reference multivdj module

utils module

addtag

Run tests

Parameter descriptions

FAQ

How to build reference genome?

Release Notes

v1.3.0

v1.2.2

v1.2.1

v1.2.0

v1.0.0